F 250 2WD Pickup V6-4.2L VIN 2 (1998)
2. Install the rear brake anti-lock sensor.
1
Position the rear brake anti-lock sensor and install the rear brake anti-lock sensor bolt.
NOTE: Do not apply force to the plastic rear brake anti-lock sensor connector.
2
Connect the electrical connector.
3. Connect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
