F 250 2WD Pickup V8-302 5.0L (1983)
Idle Speed: Adjustments
Curb Idle Speed
Federal
CURB IDLE SPEED ADJUSTMENT
-
Place the transmission in Neutral (manual) or Park (automatic).
-
Bring engine to normal operating temperature (upper radiator hose hot).
-
Place A/C Heat selector to "OFF" (if equipped).
-
Disconnect and plug vacuum hose to thermactor air bypass valve (manual transmission only).
-
Place the transmission in the specified gear. See: Specifications
Without Automatic Overdrive
With Automatic Overdrive
-
Check curb idle rpm. Adjust to specification. See: Specifications
-
Place the transmission in Neutral (manual) or Park (automatic). Rev the engine momentarily. Place the transmission in specified position, and
recheck curb idle rpm. Readjust if required.
-
Remove plug from vacuum hose to thermactor air bypass valve and reconnect (manual transmission only).
California