F 250 2WD Pickup V8-351 5.8L VIN H 4-bbl HP (1985)
Figure 2
3.
Thoroughly clean and inspect the hub bore, Figure 2.
CAUTION: MAKE SURE THE HUB BORE IS FREE OF DIRT, GREASE, BURRS OR NICKS.
NOTE:
HUB BEARINGS MUST BE PRELUBED WITH GREASE PRIOR TO INSTALLATION. USE XG-1-C GREASE OR EQUIVALENT.
4.
Pack each bearing cone and roller assembly with a bearing packing tool.
Figure 3
5.
Install the seal in the hub with the Ford logo facing up, Figure 3.
CAUTION: HUB SEAL MUST BE FREE OF DIRT OR GREASE.