F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
4. Disconnect the parking brake lever.
1
Remove the parking brake lever bolt lock nut, at the back of the brake backing plate, and the parking brake lever bolt.
2
Remove the parking brake rear cable and conduit from the parking brake lever.
5. Remove the parking brake lever.
6. Remove the adjusting screw assembly.
1
Disconnect the brake shoe adjusting lever cable from the brake shoe adjusting lever.
2
Remove the brake shoe adjusting lever cable.
3
Remove the cable guide,
4
Remove the adjusting lever return spring and the brake shoe adjusting lever.
5
Remove the brake shoe adjusting screw spring.
6
Remove the brake adjuster screw assembly.
7. Remove the rear brake shoe and lining.
1
Remove the brake shoe anchor pin guide plate.
2
Remove the brake shoe hold-down springs and the brake shoe hold-down spring pins.
3
Remove the rear brake shoes and linings.
Installation
