F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
Brake Pad: Service and Repair
Rear
Removal
1. Inspect the brake pads for wear or contamination. Install new if worn to or past specification.
2. NOTE: It is not necessary to remove the rear wheel brake hose when performing this procedure.
Remove the rear disc brake caliper.
3. CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the brake pads.
Remove the brake pads.
4. Retract the caliper piston into the rear disc brake caliper.