F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
Install filter assembly and transmission pan.
5. NOTE: Transmission pan gasket is reusable unless damaged.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan.
Position the (A) gasket onto the cleaned fluid pan. Make sure the (B) magnet is positioned over the dimple in the fluid pan.
6. Install the fluid pan.
1
Position the fluid pan.
2
Install the bolts.
7. Lower the vehicle.
8. Reconnect the battery ground cable.
9. CAUTION: Use only Motorcraft MERCON or MERCON V (ATF) Transmission Fluid or equivalent Meeting FORD specification. The
use of any other fluids can result in the transmission failing to operate in a normal manner or failure.
Refill the transmission.
-
Add 6.2 liters (6.5 quarts) of Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent Meeting FORD
specification. transmission fluid to the transmission through the fluid filler tube.
-
Start the engine. Move the transmission range selector lever through all the gear ranges and allow to engage before moving to the next gear.
-
Check and adjust the transmission fluid, in 0.24 liter (0.5 pint) increments, to the proper level (cross-hatched area of the fluid level indicator
at normal operating temperature.
