F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
7. Clean and inspect the (A) transmission fluid pan, (B) transmission fluid pan gasket and (C) magnet.
8. Flush the fluid cooler, and fluid cooler lines.
9. Flush the torque converter.
Installation
1. NOTE: A new torque converter drain plug must be used.
Install the torque converter drain plug.
2. Install torque converter housing plug.
3. CAUTION: If installing a new filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal.
Use care not to damage the main control bore.
