F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
Transmission Mount: Service and Repair
4R100
Special Tools
Removal
NOTE: 4x2 shown, 4x4 similar.
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. Remove the nuts.
4. Install the High Lift Transmission Jack with the Transmission Jack Adapter to the transmission.
5. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and
OSS sensors will occur.
