F 250 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
1. NOTE: If not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface Cleaner
F4AZ-19A536-A or equivalent meeting Ford specification WSE-M5B392-RA. Allow to dry until there is no sign of wetness, or four minutes,
whichever is longer. Failure to follow this procedure can cause future oil leakage.
Apply a bead of silicone in two places where the engine front cover meets the cylinder head.
-
Use Silicone Gasket and Sealer F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
2. Position the (A) valve cover and the valve cover gasket on the (B) cylinder head, and loosely install the bolts.
Romeo Engine