F 250 2WD Pickup V8-5.4L SOHC VIN 3 (1999)
Voltage Regulator: Service and Repair
REMOVAL
NOTE: The voltage regulator is serviceable as an assembly only.
1. Remove the Generator.
2. Remove the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
1
Remove the screws.
2
Remove the (A) generator brush and terminal holder and (B) voltage regulator assembly.
INSTALLATION
1. Install the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
1
Depress the (C) brushes and insert a (D) wire to hold brushes during installation.
2
Install the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
3
Install the screws and remove the (D) wire.
2. Install Generator.