F 250 2WD Pickup V8-7.3L DSL (1990)
Camshaft: Service and Repair
Fig. 15 Camshaft Assembly
1.
Remove ENGINE as described in this section.
2.
Remove injection pump and adapter, intake manifold, valve lifters, engine front cover and fuel supply pump.
3.
Remove camshaft drive gear, fuel supply pump cam, spacer and thrust plate from camshaft, Fig. 15.
4.
Remove camshaft using camshaft bearing set tools T65L-6250-A and Rotunda 14-0314, or equivalent.
5.
Reverse procedure to install. Lubricate camshaft lobes with DOAZ-19584-A grease, or equivalent, and the journals with clean engine oil. Tighten
camshaft Allen bolt to specifications.
