F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
2. Position the parking brake control to the steering column support bracket and install the three retaining nuts. Tighten to 17-23 Nm (13-17 ft lb).
3. Connect the front parking brake cable and conduit to the cable connector.
4. Connect the parking brake indicator light switch connector.
5. Carefully remove the drill bit from the parking brake control.
6. Stroke the parking brake several times. Rotate both rear wheels to be sure that the parking brakes are not dragging.
7. Install the cowl side panel.