F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
exhaust rocker arm.
4. Install the intake rocker arm or exhaust rocker arm.
5. Install the two rocker arm bolts. Tighten rocker arm bolts evenly to 27 Nm (20 ft lb).
6. Install the valve cover gasket.
Fuel Injector Connector
7. Connect the electrical connectors to the fuel injectors and glow plugs.
8. Install the valve cover and retaining bolts. Tighten bolts to 11 Nm (8 ft lb).
9. Connect the engine harness electrical connectors to the valve cover gasket. Install the fuel injector harness clip.
10. Connect the vacuum pump hose to the vacuum pump.
11. Install the intake duct bracket and the two retaining nuts.
12. Install the crankcase breather assembly and the two retaining screws.
13. Install the intake duct tube assembly, the two retaining bolts and the clamps at the turbocharger and air cleaner.
