F 250 2WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Seals and Gaskets: Service and Repair
REMOVAL AND INSTALLATION
1. Remove axle shaft.
2. Insert tool No. T85T-1225-AH, or equivalent, and tool No. T50T-100-A, or equivalent, into axle bore so tangs on tool engage bearing outer race.
Remove bearing and seal as an assembly.
3. Install new bearing using tool No. T80T-4000-W, or equivalent, and new seal using tool No. T80T-4000-Y, or equivalent. Pack lips of seal with
tool No. C1AZ-19590-B, or equivalent.
4. Reinstall axle.