F 250 2WD Super Duty V10-6.8L (2009)
Remote Control: Service and Repair
Steering Wheel Controls
Removal and Installation
NOTE: It is not necessary to remove the driver air bag module during this procedure.
1. NOTE: When removing the steering wheel controls, disengage the RH side of the controls first.
Using a suitable tool such as a flat-bladed screwdriver, pry the steering wheel controls out of the steering wheel.
2. NOTE: Do not allow the electrical connector to fall back into the steering wheel.
Remove the steering wheel controls.
-
Disconnect the electrical connector.
3. To install, reverse the removal procedure.