F 250 2WD Super Duty V10-6.8L (2009)
Rear Door Exterior Handle: Service and Repair
Exterior Rear Door Handle - Crew Cab
Exterior Rear Door Handle - Crew Cab
Removal and Installation
NOTE: The door glass must be in the raised position to remove the exterior door handle.
1. Remove the rear door trim panel.
2. Position the water shield aside.
3. Remove the body plug.
4. Remove the 2 exterior door handle nuts.
-
To install, tighten to 9 Nm (80 lb-in).
5. Release the exterior door handle actuating rod clip and remove the exterior rear door handle.
6. To install, reverse the removal procedure.