F 250 2WD Super Duty V10-6.8L (2009)
Rear Door Panel: Service and Repair
Door Trim Panel - Rear, Crew Cab
Door Trim Panel - Rear, Crew Cab
Removal and Installation
1. If equipped, remove the window control switch panel.
-
Disconnect the electrical connector.
2. If equipped, remove the window regulator handle.
1. Position the window regulator handle cover aside.
2. Remove the window regulator handle screw and regulator handle.
3. Remove the 2 rear door trim panel center screws.
4. Remove the rear door trim panel lower screw.
5. NOTICE: Do not pull directly outward on rear door trim panel as damage will occur.