F 250 2WD Super Duty V10-6.8L (2009)
8. NOTICE: To avoid damage to the B-pillar trim panel, remove any retaining clips from the body and attach them to the B-pillar trim
panel before installing.
To install, reverse the removal procedure.
B-Pillar Trim Panel - Regular Cab
B-Pillar Trim Panel - Regular Cab
Removal and Installation
1. Remove the door opening scuff plate trim panel.
2. Position the front seat(s) to the full forward position.
3. Position aside the door opening weatherstrip.
4. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1. Position the shoulder safety belt guide cover upward.
2. Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the shoulder safety belt guide.