F 250 2WD Super Duty V10-6.8L (2009)
Tailgate Release Handle: Service and Repair
Tailgate Release Handle
Tailgate Release Handle
Removal and Installation
1. Open the tailgate.
2. Remove the screws, retaining clips (if equipped) and the tailgate access panel.
3. Disconnect the tailgate actuating rods from the remote control.
4. Remove the tailgate release handle.
1. Remove the 2 tailgate latch remote control nuts.
-
To install, tighten to 9 Nm (80 lb-in).
5. To install, reverse the removal procedure.