F 250 2WD Super Duty V10-6.8L (2009)
Brake Rotor/Disc: Removal and Replacement
Brake Disc
Brake Disc
NOTE: Dual Rear Wheels (DRW) shown, Single Rear Wheel (SRW) similar.
Removal
NOTE: The brake disc and the wheel bearing hub are the same part on Rear Wheel Drive (RWD) F-250-F-350 vehicles. To remove or install the front
brake disc on RWD F-250-F-350 vehicles, refer to Wheel Bearing for the wheel bearing and wheel hub procedure. See: Maintenance/Wheels and
Tires/Wheel Bearing
All vehicles
1. Remove the wheel and tire.
2. NOTICE: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.
Remove and discard the 2 caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
-
Support the caliper and anchor plate using mechanic's wire.
Single Rear Wheel (SRW) vehicles
3. NOTE: If the brake disc cannot be removed easily, apply penetrating and lock lubricant on the brake disc-to-wheel hub mating surfaces.