F 250 2WD Super Duty V10-6.8L (2009)
Hydraulic Brake Booster: Testing and Inspection
Brake Booster
Brake System Inspection
Brake Booster
1. Inspect the brake booster for excessive corrosion or damage. Inspect the vacuum hoses for leaks and kinks.
-
Install a new brake booster if signs of excessive corrosion or damage is found.
-
Repair or replace vacuum hoses as necessary.
-
To check for correct brake booster operation, refer to Component Tests See: Testing and Inspection/Component Tests and General
Diagnostics.
2. Inspect the Hydro-Boost(R) brake booster excessive corrosion or damage. Inspect the fluid hoses for leaks and kinks.
-
Install a new Hydro-Boost(R) brake booster if signs of excessive corrosion or damage is found.
-
Repair or replace fluid hoses or connections as necessary.
-
To check for correct Hydro-Boost(R) brake booster accumulator operation refer to Component Tests See: Testing and Inspection/Component
Tests and General Diagnostics.