F 250 2WD Super Duty V10-6.8L (2009)
2. Install the 2 upper TB spacer bolts in 2 stages:
-
Stage 1: Tighten to 9 Nm (80 lb-in).
-
Stage 2: Tighten an additional 90 degrees.
3. Install the PCV heated element and the 2 screws.
4. Connect the brake booster vacuum hose.
5. Connect the EVAP canister purge valve quick connect coupling to the TB spacer.
6. Connect the PCV tube quick connect coupling to the TB spacer.
7. Connect the main vacuum harness to the TB spacer.
8. Install the TB. For additional information, refer to Throttle Body See: Service and Repair.
