F 250 2WD Super Duty V10-6.8L (2009)
Power Distribution Module: Service and Repair
Upfitter Switch
Upfitter Switch
Removal and Installation
All vehicles
1. Remove the instrument panel center finish panel.
Vehicles with trailer brakes
2. Using a suitable tool, press the retaining tab at the top and remove the Trailer Brake Control (TBC) module.
Vehicles without trailer brakes
3. Using a suitable tool, press the 4 retaining tabs and remove the storage bin.
All vehicles
4. Using a suitable tool, press the 4 retaining tabs and remove the upfitter switch.
5. To install, reverse the removal procedure.