F 250 2WD Super Duty V10-6.8L (2009)
-
Tighten to 99 Nm (73 lb-ft).
13. Install the new worm thrust bearing retainer ring setscrew.
-
Tighten to 2 Nm (18 lb-in).
14. Secure the steering gear housing in the soft-jawed vise.
15. Install the new valve housing-to-gear housing O-ring seal.
16. Install the new valve housing seal.
17. Lubricate the piston seal with multi-purpose grease.
18. Install the piston assembly into the steering gear housing.
