F 250 2WD Super Duty V10-6.8L VIN S (1999)
adjust tongues and belts and retractors, use only the replacement parts specified in the Ford Master Parts Catalogs for the make and model of the
vehicle being serviced. Safety belt assemblies must not be interchanged between vehicle models.
1. Remove the shoulder safety belt height adjuster cover push-pin.
2. Remove the shoulder safety belt height adjuster.
1
Position the shoulder safety belt height adjuster cover down.
2
Use the Safety Belt Bolt Bit to remove the shoulder safety belt height adjuster bolt.
3
Remove the shoulder safety belt height adjuster.
3. Remove the front door scuff plate.
4. Remove the front safety belt retractor.
1
Use the Safety Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt retractor.
5. Remove the front safety belt anchor.