F 250 2WD Super Duty V10-6.8L VIN S (1999)
Using the (A) Extension Housing Bushing Replacer, install the (B) extension housing bushing.
3. Align the (A) extension housing seal in the extension housing, with the (B) drain hole positioned downward. The seal is model-dependent; refer to
the parts catalog for the correct parts.
4. Using the (A) Extension Housing Seal Replacer, seat the extension housing seal into the (B) extension housing.
5. Install the driveshaft.
6. Remove the supports and lower the vehicle.
7. Fill the transmission to the specified level with Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent meeting FORD
specification.