F 250 2WD Super Duty V8-5.4L (2008)
LABOR ALLOWANCES
PARTS REQUIREMENTS / ORDERING INFORMATION
The Front Driver Seat Back Clamp Kit will not be direct shipped for this program. Order your parts requirements through normal order processing
channels.
Questions regarding parts should be directed to the Special Service Support Center or E-mailed.
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION AND RETURN
Replaced front driver seat backs are subject to random selection for return to the Ford Warranty Parts Analysis Center (WPAC). Refer to your daily
PEARS (Parts Entry and Return System) register for part disposition and return instructions.
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures."
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
CERTAIN 2008 F-250 THROUGH F-550 SUPERDUTY VEHICLES EQUIPPED
WITH DRIVER SEAT LUMBAR - FRONT DRIVER SEAT BACK INSPECTION
AND REPAIR
OVERVIEW
This program involves inspecting the front driver seat back inboard pivot bracket welds on vehicles equipped with driver seat lumbar, and installing a
clamp kit.
INSPECTION
1.
Move the driver seat and seat back to the full forward position.