F 250 2WD Super Duty V8-5.4L (2008)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Recover the refrigerant. For additional information, refer to Heating and Air Conditioning.
3. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
4. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
5. Disconnect the horn assembly electrical connector.
6. Disconnect the LH hood latch cable and the position retainers and position the cable aside.
7. Remove the bolt and the horn assembly.
8. Disconnect the RH hood safety latch cable and the position retainers and position the cable aside.
9. Disconnect the power steering fluid cooler hose position retainer from the radiator.
10. Disconnect the LH air deflector retainer.
11. Remove the 2 bolts and position the power steering fluid cooler aside.
12. Remove the clip and disconnect the upper radiator coolant hose quick connect coupling.
13. Remove the 2 bolts and position the power steering reservoir aside.
14. Disconnect the degas bottle coolant inlet hose from the radiator.
