F 250 2WD Super Duty V8-5.4L (2008)
Radiator (Part 4)
Removal and Installation
5.4L engines
1. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
2. CAUTION: The large clutch assembly nut has a right-hand thread and must be rotated counterclockwise to remove it.
Using the special tool, remove the fan and fan clutch from the coolant pump pulley.
^
To install, tighten to 55 Nm (41 lb-ft).
6.8L engines
3. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
4. Press the 4 position retaining tabs and rotate the lower cooling fan shroud upward until the position retainer tab locks into position.