F 250 2WD Super Duty V8-5.4L (2008)
All camshaft roller followers
1. CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Failure to follow these instructions may
result in engine damage.
NOTE: Do not allow the valve keepers to fall off of the valve or the valve may drop into the cylinder. If a valve drops into the cylinder, the
cylinder head must be removed.
NOTE: It may be necessary to push the valve down while compressing the spring.
NOTE: Lubricate the camshaft roller followers with clean engine oil prior to installation.
Using the special tool, compress the valve spring and install the camshaft roller follower.
2. Repeat the previous step for each camshaft roller follower being serviced.
LH cylinder head camshaft roller followers
3. Install the LH valve cover.
RH cylinder head camshaft roller followers
4. Install the RH valve cover.
