F 250 2WD Super Duty V8-5.4L (2008)
Ignition Coils, RH Valve Cover and Gasket
Removal
1. Drain the engine cooling system. For additional information, refer to Cooling System.
2. Remove the bolt and position the transmission filler tube aside.
3. Disconnect the quick connect coupling and position the crankcase vent tube aside. For additional information, refer to Fuel Delivery and Air
Induction.
4. Disconnect the heater coolant hose from the coolant crossover assembly.
5. Disconnect the 2 PCM electrical connectors and the wiring harness retainers from the support bracket and position aside.
6. Disconnect the 4 RH ignition coil electrical connectors.