F 250 2WD Super Duty V8-5.4L (2008)
Idler Pulley: Service and Repair
Accessory Drive Belt Idler Pulley - Gasoline Engines
Front End Accessory Drive (FEAD) Exploded View - 5.4L (3V), 6.8L (3V)
Removal and Installation
1. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.
2. Remove the bolt and the accessory drive belt idler pulley.
^
To install, tighten to 25 Nm (18 lb-ft).
3. Repeat the previous step for each accessory drive belt idler pulley being serviced.
4. To install, reverse the removal procedure.