F 250 2WD Super Duty V8-5.4L (2008)
11. Position the oil pan gasket and the oil pan and loosely install the 16 bolts.
12. Tighten the bolts in 3 stages, in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 lb-inch).
^
Stage 2: Tighten to 20 Nm (15 lb-ft).
^
Stage 3: Tighten an additional 60 degrees.
13. Using the special tools, align the engine support insulator studs and lower the engine.