F 250 2WD Super Duty V8-5.4L (2008)
Water Pump: Service and Repair
Coolant Pump - Gasoline Engines
Material
Removal and Installation
1. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
2. Remove the cooling fan.
3. Loosen the 4 coolant pump pulley bolts.
^
To install, tighten to 25 Nm (18 lb-ft).
4. Rotate the tensioner clockwise and remove the accessory drive belt from the coolant pump pulley.
