F 250 2WD Super Duty V8-5.4L (2008)
4. Detach the 2 blower motor vent tube clips and remove the vent tube.
5. Disconnect the blower motor electrical connector.
6. Rotate the blower motor counterclockwise to disengage it from the heater core and evaporator core housing.
7. Remove the blower motor.
8. CAUTION: If the wheel is to be reused, clean the corrosion from the shaft end prior to removing the wheel.
Remove the wheel from the blower motor.
1
Remove the push clip.
2
Remove the wheel from the blower motor.
9. To install, reverse the removal procedure.