F 250 2WD Super Duty V8-5.4L (2008)
Communications Control Module: Service and Repair
AUDIO CONTROL MODULE (ACM)
Removal and Installation
NOTE: When installing a new navigation audio control module (ACM), remove the navigation map DVD from the ACM (if possible) before sending it
to an authorized audio system repair facility.
1. NOTE: Programmable module installation (PMI) is only necessary if a new ACM is being installed.
Upload the ACM configuration information to the scan tool.
2. Remove the instrument panel center finish panel.
3. Remove the 4 screws and the ACM.
-
Disconnect the electrical connectors.
4. To install, reverse the removal procedure.
-
Download the configuration information to the ACM.