F 250 2WD Super Duty V8-5.4L (2008)
Ball Joint: Service and Repair
Ball Joint
Ball Joint
Special Tools
Removal
1. Remove the wheel spindle or wheel knuckle assembly.
2. Remove the lower ball joint grease plug.
3. Position the wheel spindle in a vise and remove the snap ring from the lower ball joint.
NOTICE: To avoid damage to the components, do not use heat to aid ball joint removal.
4. Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, remove the lower ball joint.
5. Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, remove the upper ball joint.