F 250 2WD Super Duty V8-5.4L (2008)
11. Connect the middle transmission fluid cooler tubes to the remote mount fluid filter housing.
12. Install the remote mount transmission fluid filter secondary latches.
All vehicles
13. Position the starter harness bracket onto the stud and install the nut.
^
Tighten to 25 Nm (18 ft. lbs.).
14. Position the transmission fluid cooler tube assembly bracket onto the stud and install the nut.
^
Tighten to 11 Nm (8 ft. lbs.).
15. Install the front transmission fluid cooler tube assembly and connect the front cooler tube assembly retainer to the frame rail.
16. Connect the transmission fluid cooler tube assemblies.
17. Install the front fluid cooler tube assembly secondary latches.
18. Connect the front transmission fluid cooler tube assembly and the auxiliary cooler hoses to the radiator in-tank cooler.
19. Fill with clean automatic transmission fluid and check for leaks.
