F 250 2WD Super Duty V8-5.4L (2008)
Remove the OSS sensor.
1
Remove the bolt.
2
Remove the OSS sensor.
Rear wheel drive (RWD) vehicles
4. NOTE: Prior to removing the speed sensor, make sure that the area around the sensor is free of foreign material to prevent contamination of the
transmission.
Remove the OSS sensor.
1
Remove the bolt.
2
Remove the OSS sensor.
Installation
4WD vehicles
1. Install the OSS sensor.
1
Lubricate the O-ring with clean automatic transmission fluid and install the OSS sensor.
2
Install the bolt.
^
Tighten to 9 Nm (80 inch lbs.).
RWD vehicles
2. Install the OSS sensor.
1
Lubricate the O-ring with clean automatic transmission fluid and install the OSS sensor.
2
Install the bolt.