F 250 2WD Super Duty V8-5.4L (2008)
![background image](/ford/f_250_2wd_super_duty/v8-5.4l/Page-1787005.png)
Assembly
1. Install a new gasket, the backing plate and bolts.
^
Tighten to 13 Nm (10 ft. lbs.).
2. Install a new filter screen gasket.
3. NOTE: Tighten the bolts in a crisscross pattern to prevent the gasket from becoming distorted.
Assemble the top and bottom halves of the solenoid body.
^
Tighten to 13 Nm (10 ft. lbs.).