F 250 2WD Super Duty V8-5.4L (2008)
Throttle Position Sensor/Switch: Service and Repair
Digital Transmission Range (TR) Sensor
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the selector lever cable end.
3. Remove the transmission fluid pan, gasket and filter.
4. Disconnect the transmission range (TR) sensor electrical connector.
5. NOTE: The pin should be driven up through the manual valve.
Remove and discard the manual control valve detent lever shaft retaining pin.