F 250 2WD Super Duty V8-5.4L (2008)
6. CAUTION: Slowly release the spring tension after the cable swag is removed from the sliding glass channel bracket. If the spring tension
is suddenly released, the cables can unwind from the drum. If the cables unwind from the drum, a new regulator and motor assembly will
have to be installed.
NOTE: RH shown, LH similar.
Remove the cable swags from the sliding window glass channel bracket.
-
Carefully squeeze the regulator and motor assembly spring to create slack in the cable.
-
Remove the cable swag from the sliding window glass channel bracket.
7. Pull the LH and RH cable ends out of the sliding window trough.
8. Disconnect the power sliding window cable retainer clips.
9. Disconnect the electrical connector.