F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
3. Release the upper door latch cable and conduit from the remote control.
1
Open the locking clip and release the cable.
2
Release the cable conduit.
4. Remove the upper rear door latch.
1
Remove the screws.
2
Remove the upper rear door latch.
INSTALLATION
1. NOTE: If a new component is to be installed, refer to the Ford Master Parts Catalog for specific part information. The linkage must be adjusted
during installation.
To install, reverse the removal procedure.
