F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
5. Remove the rear corner trim panel.
6. Route the safety belt and the shoulder safety belt guide through the rear corner trim panel openings.
7. Remove the rear corner trim panel from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
Regular Cab
TRIM PANEL - REAR CORNER, REGULAR CAB
Torx Bit, Safety Belt Bolt
SPECIAL TOOL(S)
REMOVAL
1. Remove the scuff plate.
2. Position front seat(s) forward.