F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
Master Cylinder
Material
Material
Disassembly
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
1. Remove the brake master cylinder.
2. Clean the outside of the brake master cylinder.
3. Remove the brake master cylinder filler cap and drain the remaining brake fluid.
4. If so equipped, remove the brake pressure switch.