F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
9. Remove the ICP sensor.
Vehicle with automatic transmission
10. Remove the nut and position the transmission fluid indicator and tube assembly aside.
All vehicles
11. CAUTION: To prevent engine damage, do not use air powered tools when installing the valve cover.
NOTE: Mark the position of the valve cover bolts for valve cover bolt installation.
Remove the eleven bolts and the valve cover. Clean and inspect the valve cover gasket and install a now gasket, if necessary.
12. Remove the high pressure oil manifold to valve cover gasket.
13. To install, reverse the removal procedure.