F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
4. Install the turbocharger heat shield and the nuts.
Early build
5. Install the intake manifold and bolts and tighten in the following sequence.
1
Loosely install bolts 1-8.
2
Tighten bolts 9-16 to 11 Nm (8 ft. lbs.).
3
Tighten all bolts to 11 Nm (8 ft. lbs.) in the sequence shown.
6. Install the gasket and the EGR cooler V-clamp.