F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
10. Loosen the bolt and remove the compressor manifold and tube assembly.
-
Discard the O-ring seals.
11. Remove the pressure cutoff switch.
-
Discard the O-ring seal.
INSTALLATION
1. To install, reverse the removal procedure
-
Install new O-ring seals lubricated in clean mineral oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the refrigerant system.