F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Control Assembly: Service and Repair
Auxiliary Climate Control Assembly
Front
AUXILIARY CLIMATE CONTROL ASSEMBLY - FRONT
REMOVAL
1. Remove the screw, disengage the clips, and lower the overhead console.
2. Disconnect the electrical connectors.
3. Remove the climate control assembly from the overhead console.
1
Disconnect the electrical connectors.
2
Remove the 2 screws.
3
Remove the climate control assembly.
INSTALLATION
1. To install, reverse the removal procedure.
Rear
AUXILIARY CLIMATE CONTROL ASSEMBLY - REAR
REMOVAL