F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
16. NOTE: Vehicle with manual climate control shown, vehicles with EATC similar.
Disconnect the electrical connectors.
17. Remove the bolts and the evaporator core housing support bracket.
-
Detach the wire harness and vacuum line retainers.
18. Remove the bolt and position the cable aside.
19. Remove the RH lower instrument panel insulator.
20. Lower the glove compartment.
21. From inside the vehicle, disconnect the vacuum harness connector.
-
Detach the vacuum harness connector from the heater core housing.